|
Specifications: |
A406 |
A407 |
A606 |
A607 |
|
Working area (XxYxZ) |
304x256x33 mm, 12x10x1.3 inch |
304x256x33 mm, 12x10x1.3 inch |
406x279x33 mm, 16x11x1.3 inch |
406x279x33 mm, 16x11x1.3 inch |
|
Machine design |
Heavy duty aluminum and stainless steel platform |
|
Machine table |
16 mm, 0.625 inch stress relieved high stability aluminum alloy |
|
Tool holders |
12 |
12 |
16 |
16 |
|
Resolution (X,Y,Z) |
2.54 μm, 0.0001 inch |
|
Repeatability (X,Y,Z) |
2.54 μm, 0.0001 inch |
|
Tool penetration control |
Constant Automatic Surface
Tracking - CAST™, surface tracking relative
to tool tip, fully programmable fully automatic. Uses a
linear gauge with 1 μm, 0.04 mil resolution. |
| Tool Calibration |
Precise Linear
Gauge on the Z axis (0.04 mil, 1 micron resolution) |
|
Spindle speed [rpm] |
5,000 to 60,000 programmable |
5,000 to 100,000 programmable |
5,000 to 60,000 programmable |
5,000 to 100,000 programmable |
|
Spindle motor |
3-phase induction motor; 60K/170W |
3-phase HF induction motor; 100K/300W |
3-phase induction motor; 60K/170W |
3-phase HF
induction motor; 100K/300W |
|
Spindle drive |
PhACdrive (sensorless, vector control, DSP
based) |
|
Tool collet |
3.175 mm, 0.125 inch |
|
Spindle run out |
5 μm, 0.0002 inch max |
|
Collet control |
Pneumatic direct, 6-8 Bars (85-115 PSI) |
|
Tool Change |
Automatic |
|
Minimum drill diameter |
0.2 mm, 0.008 inch |
|
Minimum track size |
0.1 mm (4 mil) |
|
Minimum gap size |
0.1 mm (4 mil) |
|
Drilling speed |
Up to 180 drill
cycles per minute (varies with the distance between holes) |
|
Homing system |
Gold plated precision needle contacts |
|
Max Travel speed (X,Y,Z) |
Up to 150 mm/s,
6.0 inch/s |
|
X/Y/Z positioning system |
2 phase bipolar stepper motors, precision lead screws with ActiveCAM™ anti-backlash SuperNuts™ |
|
Interface to PC |
USB 2.0 |
|
Spindle and vacuum start-stop |
Manual and/or program controlled |
|
Feed rate and Spindle speed |
Manual and/or program controlled |
|
Dimensions (WxDxH) |
508x432x305 mm,
20x17x12 inch |
508x432x305
mm, 20x17x12 inch |
610x483x330 mm,
24x19x13 inch |
610x483x330 mm, 24x19x13 inch |
|
Weight |
33 Kg, 72 Lbs |
34 Kg, 74 Lbs |
41 Kg, 90 Lbs |
42 Kg, 92 Lbs |
|
Power Supply |
100~240VAC,
50/60 Hz 355W
(35W stand by) |
100~240VAC,
50/60 Hz 415W
(35W stand by) |
100~240VAC,
50/60 Hz 355W
(35W stand by) |
100~240VAC,
50/60 Hz 415W
(35W stand by) |
|
Machine control system |
PhCNC360 (16-bit micro controller) |
|
Machine control programs: |
Industry standard G & M codes ASCII, PHJ job files |
|
Control and Edit software |
PhCNC, Windows based (Win2000/2003/XP/Vista/Win7)
x86/x64 |
|
Imports |
Gerber RS-274X files;
Excellon Drill and Definition files; AutoCAD DXF 2D
files; CAM350 files; PhCNC printer driver. |
